Home > Barrel Assemblies >   16" M4 Custom Upper
16" M4 Custom Upper	Our Price: $415.00 Availability: Usually Ships in 1 to 2 Weeks Product Code: CU101 Barrel DTI 16" M4 1x9 DTI 16" M4 Chrome Lined 1x9 [Add $45.00] DTI 16" M4 1x7 Chrome Lined [Add $45.00]    Bolt & Carrier Chrome Bolt & Carrier [Add $55.00] None [Subtract -$65.00] Standard Bolt & Carrier TiN Bolt & Carrier [Add $85.00]    Handguards CAR Handguard with Heat Shields-Black CAR Handguard with Heat Shields-Green [Add $3.00] DPMS Free Float Tube [Add $28.00] DPMS Vented FF Tube [Add $45.00] Knights Free Float RAS [Add $290.00] Knights RAS [Add $308.00] M4 Double Heat Shields [Add $32.00] None [Subtract -$5.00] YHM 2 Piece Four Rail Handguard [Add $92.00] YHM 4 Rail Light Weight FF Tube [Add $78.00] YHM Four Rail Free Float Tube [Add $70.00]    Gas Blocks 2 Rail Gas Block [Add $45.00] 2 Rail Gas Block with Detachable Flip Up Front Sight [Add $100.00] 4 Rail Gas Block [Add $28.00] Bull Barrel Gas Block [Add $23.00] Standard A2 Front Sight YHM 4 Rail Gas Block [Add $49.00] YHM Flip Up Front Gas Block [Add $65.00] YHM Single Rail Gas Block [Add $40.00] YHM Specter Gas Block [Add $25.00]    Flash Hiders 3 Prong Flash Hider A1 Flash Hider A2 Flash Hider None [Subtract -$2.00] Panther Comp with Holes [Add $11.00] Panther Comp with Slots [Add $11.00] Phantom 5C2 Flash Hider [Add $18.00] Phantom Aggressive End Comp/Brake [Add $18.00] Phantom Flash Hider [Add $18.00]    Uppers A1 Upper with Brass Deflector & Forward Assist [Add $45.00] A2 Upper [Add $10.00] Flat Top Upper with M4 Feed Ramps [Add $25.00] Flat Top Upper with T-Marks High Rider Upper [Add $8.00]    Charging Handle None [Subtract -$9.00] PRI Gas Buster Charging Handle [Add $75.00] Standard Charging Handle Standard Charging Handle with Badger Tac Latch [Add $17.00]    Carrying Handle Detachable Carrying Handle (Flat Top's ONLY) [Add $75.00] None    Gas Tubes CAR Gas Tube Pig Tail Gas Tube [Add $60.00]    Qty:

Description   About Upper assembly comes completely head spaced and test fired. Ready to drop onto a stripped lower receiver. Other selections are available for upper, bolt and carrier, charging handle, gas tube, handguards, flash hiders, and gas blocks. Barrel customizations are also available. Please choose from the options listed Includes 16" M4 Wilson Arms 1x9 twist, 5.56mm, chrome molly barrel Standard flat top upper AR-15 bolt and carrier assembly Standard charging handle A2 flash hider Standard Sling Swivel Standard Front Sight Post CAR handguards Standard gas tube   Average Customer Review: Based on 5 Reviews. Write a review.

Related Products... Custom Upper Our Price: $395.00 Add AR-15 Barrel Assembly Our Price: $395.00 Add AR-15 Barrel Assembly Our Price: $405.00 Add Del-Ton AR-15 Barrel Assembly Our Price: $505.00 Add Custom Upper Our Price: $395.00 Add

0 of 0 people found the following review helpful:

Just Excellent August 2, 2008 Reviewer: S.S. from Spokane Valley, WA United States   Received 16" M4 Custom Upper yesterday,  it was beautifully assembled and packaged. I took it shooting today and was very pleased. Very nice grouping, no problems whatsoever. When its time to get another it will be a Del-ton. Thanks so much. Was this review helpful to you?

0 of 0 people found the following review helpful:

What a great upper! April 26, 2008 Reviewer: JD from Washington, USA   Just got this upper and I am very pleased.  Good tight fit on my DPMS lower right out of the box.  Ran a box of Remington UMC 55gr FMJ's through it right away, no FTF, FTF, or FTE.  Reliability from the get go!  Nice finish on the upper, maybe better than the DPMS.  I would order from Del-ton again with no hesitation. Was this review helpful to you?

1 of 1 people found the following review helpful:

perfect February 15, 2008 Reviewer: beas from mustang, OK United States   first off ordered on the 5th and recieved on the 14th. that made me more than happy.  i had the yhm four rail freefloat handguard, flip up front gas block, and i added the yhm endcap which i asked dti to install and they did which i do appreciate. i went with the dti crome lined barrel and a phantom flash hider. i put all that on a dpms lower andnow i can not wait to shoot it. (i just got it today). Was this review helpful to you?

0 of 0 people found the following review helpful:

Excellent! September 20, 2007 Reviewer: Brody Weinmann from Mexia, TX United States   I just order my 16" M4 Custom Flat-top Upper and I can only say good things about it. I put on a Double Star lower I had and was amazed how well the color and fit matched. I have shot several boxes of rounds through it, so far with out even a hick-up. I am very pleased and will definitly be using Del-Ton for ALL my AR builds! Thanks Del-Ton! Was this review helpful to you?

0 of 0 people found the following review helpful:

Quality + competitive pricing = Del-Ton Inc. June 18, 2007 Reviewer: M. Kilber from South Dakota   I recently purchased a custom Del-ton M4 upper with a chrome-lined DTI barrel, the YHM 4-rail free float tube, the YHM flip down front sight gas block and an A2 flash-hider. I could cover a lot in this review about DTI's incredible customer service, more than competetive pricing and fast production times, but instead I will focus on the item being reviewed. From the second I pulled it out of the box I knew I made the right decision. I was immediately impressed with the fit and finish of this upper. In fact I thought it had a nicer appearance than my RRA. I was also pleased with the installed accessories. Everything was assembled with perfect alignment, no maring of the finish, etc. And it mounted easily to my Mega Gator lower. As a whole the rifle not only functions perfectly, but gets a lot of Oooo's and Ahhhh's. After some extended range sessions and certification, this rifle will be taking it's place in my patrol car. And that's about the highest praise I can offer. Was this review helpful to you?

Browse for more products in the same category as this item: Barrel Assemblies Barrel Assemblies > Custom Barrel Assemblies Barrel Assemblies > Custom Barrel Assemblies > 16"