Search

Contact us

  Home > Barrel Assemblies >

  16'' Mid-Length Custom Upper
16" Mid-Length Custom Upper
16" Mid Length Custom Upper
 
Our Price: $415.00



Availability: Usually Ships in 4 to 6 Weeks
Product Code: CU104

Barrel

  
Bolt & Carrier

  
Handguards

  
Gas Blocks

  
Flash Hiders

  
Uppers

  
Charging Handle

  
Carrying Handle

  

Qty:  
Description Technical Specs
 
About
Comes completely assembled, headspaced and test fired
Choose options from the list

NOTE: F-Marked Front Sight Base is not compatible with an A2 Upper due to height compatibility, therefore if you choose an A2 Upper and want a standard front sight base you need to choose the Standard A2 Front Sight Base.

PLEASE CHECK WITH YOUR LOCAL FFL DEALER TO MAKE SURE THE WEAPON YOU ARE PURCHASING IS LEGAL FOR YOUR STATE.


Average Customer Review: 5 of 5 | Total Reviews: 10 Write a review.


  0 of 0 people found the following review helpful:
 
good product April 3, 2014
Reviewer: harley from statesville, NC United States  
I received my upper about four weeks after ordering it. Upon opening the box and inspecting it I knew it was going to shoot good. put it on my PSA mil-spec lower and shot about thirty rounds through it no problem after scope sighted in it was no contest. hope to buy another one!

Was this review helpful to you?

  4 of 4 people found the following review helpful:
 
I couldn't be happier December 3, 2013
Reviewer: Josh from Teague, TX  
At the price I paid for this 1:7 twist, chrome lined, mid length upper I have no complaints. I gave it a good cleaning and pinned it to my RRA stripped lower with an A2 fixed stock and rifle buffer. Mounted a fixed rear sight and the fist three shots were on the money. I have about 200 rounds of American Eagle 62gr through it so far and I have had no issues at all. My only negative I could find on mine was the standard charging handle felt a little flimsy when I initially was disassembling the upper for cleaning.  It feels just fine when operating, but really was the only part on this upper assembly that didn't out right impress me. Performs every bit as well as any RRA, Bushy, or similar AR I have handled. Del-Ton has a repeat customer right here whenever I have any future budget projects.

Was this review helpful to you?

  9 of 9 people found the following review helpful:
 
Mid length upper with upgrades May 28, 2013
Reviewer: Kenny W from Disputanta, VA United States  
Del-ton is a pleasure to work with.  When I called with questions they were extremely helpful with option decisions.  Bought this upper with upgraded YHM free-float handguards, YHM flip-up sights on both ends, YHM 5c2 suppressor, and badger tac-latch.  They said it would be delivered in about 2-weeks... wrong, I ordered it on a Tuesday and IT WAS HERE ON FRIDAY the same week!!!  Looks great, finish matches my DPMS lower, put it on and it runs like a champ.... hasn't missed a lick.

One thing I didn't do, wish I had.  If considering anything with YHM free-float or railed handguards I highly recommend you order the "end cap".  Not a necessity but sure dresses up the looks of the rifle..... just a suggestion.  Wish I had ordered and had it installed while they were building mine.

Thank you Del-ton for your helpfulness, rapid service, and a wonderful product.  I'll certainly be doing business with you in the future and will highly recommend you to friends !!!!

KW

Was this review helpful to you?

  3 of 3 people found the following review helpful:
 
4500 rds and NO complaints. September 23, 2012
Reviewer: john mirarchi from beaumont, CA United States  
I bought this upper about a year ago and have been running it hard ever since. I use it as a loaner and to date it has over 4500rds ( documented ) down the pipe with no cleaning, just adding oil when need. Over a 1000 of the rounds fired have been on a NFA reg. full auto lower and yes, fired in full auto. It has had only two failures to fire and those were not the fault of the upper but of the ammo. I would whole heartedly recommend these to anyone looking for an upper they intend to run hard. I will update this review when it hits the 7500rd mark which should not be long as it is now being used on a rental gun at a machine gun range in AZ.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
TOP SCORE! April 16, 2012
Reviewer: TUN TAVERRRRRN! from AZ  
I Ordered this Rifle 3 March and it showed up 13 April . I went with the 16" middy I wanted to go as lightweight as possible but wanted the 1:7 twist. So I went wiht the Magpull MOE handguards and it really isnt heavy at all . Badger Tac Latch is worth the additional 15 dollars. I havent shot it yet but the rifle is solid. I mounted this on a DPMS lowerand it locks up tight , no wobble at all. the finish even matches . this is the way to go . I'll be ordering from DEL-TON for my next build as well going to be an M16A4  SEMPER FI !

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

Barrel Assemblies
Barrel Assemblies > Custom Barrel Assemblies
Barrel Assemblies > Custom Barrel Assemblies > 16"